EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is usually a very productive photo voltaic controller created for off-grid photo voltaic units. According to multiphase synchronous rectification know-how, it makes sure optimized energy conversion and system stability for a wide range of photovoltaic (PV) programs.

Essential Attributes with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller know-how for top-quality photo voltaic Electrical power harvesting. Vital features include:

Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with true-time knowledge monitoring.
Several Load Handle Modes which includes manual and timer.
Complete Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Move Guide to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Planning the Controller
Guarantee all parts are incorporated: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Confirm the model number and voltage scores match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Find a properly-ventilated, dry spot near to the battery bank.
Protected the Tracer AN controller utilizing the supplied mounting brackets.
Sustain good clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Warning: Constantly follow right protection protocols and ensure the system is run off ahead of connecting elements.

Step one: Link the battery terminals towards the demand controller (beneficial to constructive, damaging to negative).
Move 2: Connect the photo voltaic panel array for the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Settings
Electric power to the controller by connecting the battery initially.
Use the Liquid crystal display Exhibit to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
5. Checking and Info Logging
The Tracer AN Collection supports true-time monitoring utilizing the MT50 remote meter.
Facts could be logged via the RS485 conversation port utilizing program for example Solar Station Laptop.
Distant monitoring can be done Together with the EPEVER WiFi module.
6. Troubleshooting Widespread Problems
Challenge visit here 1: No Electric power Output

Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: More than-Voltage Security

Verify the photo voltaic array’s voltage rating.
Alter system parameters if needed.
Issue three: No Battery Charging

Inspect PV wiring for continuity.
Ensure MPPT options during the menu.
Advantages of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how guarantees:

Better Efficiency: Diminished Power losses during conversion.
Improved Trustworthiness: Secure performance beneath variable hundreds.
Lengthier Battery Lifetime: Consistent and correct charging profiles.
Summary
The EPEVER Solar Charge Controller with multiphase synchronous rectification know-how is definitely an Extraordinary option for optimizing solar power era and increasing battery life. By subsequent the above mentioned set up manual, consumers can assure maximum efficiency and process longevity.

Report this page