EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Solar Demand Controller is really a hugely productive solar controller suitable for off-grid photo voltaic units. According to multiphase synchronous rectification technological know-how, it guarantees optimized Electricity conversion and method security for a variety of photovoltaic (PV) programs.

Critical Capabilities of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technology for exceptional solar Vitality harvesting. Essential characteristics incorporate:

Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
State-of-the-art MPPT Algorithm with >ninety nine% effectiveness.
Twin-Stage Charging for Improved battery existence.
LCD Show with actual-time info monitoring.
Numerous Load Management Modes which include guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Step Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Assure all parts are provided: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Confirm the design quantity and voltage ratings match your photo voltaic panel and battery requirements.
two. Mounting the Charge Controller
Select a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller utilizing the provided mounting brackets.
Manage right clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by right basic safety protocols and ensure the system is run off ahead of connecting components.

Step one: Link the battery terminals for the charge controller (favourable to constructive, damaging to negative).
Move 2: Connect the photo voltaic panel array on the PV input terminals.
Move three: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability to the controller by connecting the battery very first.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 remote meter.
Details is usually logged by means of the RS485 communication port applying application like Photo voltaic Station Computer.
Distant monitoring can Click Here be done With all the EPEVER WiFi module.
six. Troubleshooting Widespread Issues
Challenge 1: No Electric power Output

Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Defense

Verify the photo voltaic array’s voltage ranking.
Alter method parameters if necessary.
Concern 3: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification engineering makes sure:

Greater Performance: Decreased Strength losses during conversion.
Improved Trustworthiness: Stable functionality less than variable masses.
Extended Battery Lifestyle: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering is really an Outstanding choice for optimizing solar energy generation and extending battery lifetime. By following the above set up guide, people can ensure maximum efficiency and program longevity.